Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía Para Resolver Problemas
Build a Resilient Packet Ring with Four Nodes
Through ML Card on Cisco ONS 15454
Through ML Card on Cisco ONS 15454
Document ID: 64245
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Topology
Build a Four−Node RPR
Verification
Step 1
Step 2
Step 3
Step 4
Related Information
Prerequisites
Requirements
Components Used
Conventions
Topology
Build a Four−Node RPR
Verification
Step 1
Step 2
Step 3
Step 4
Related Information
Introduction
This document describes the configuration to build a Resilient Packet Ring (RPR) with four nodes through
Multi−Layer (ML) cards on Cisco ONS 15454.
Multi−Layer (ML) cards on Cisco ONS 15454.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454
•
Cisco ONS 15454 ML−Series Ethernet Cards
•
Cisco IOS® Software
•
Bridging and IP Routing
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454 running ONS Release 5.02
•
ML (bundled as part of the ONS 5.02 release) running Cisco IOS Software Release 12.2.
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.