Cisco Cisco Wireless LAN Controller Module Guía De Información
Contents
Introduction
What is an Ethernet over IP (EoIP) tunnel to the unsecured network area?
How do I select the right controller to deploy as a guest anchor controller?
How many Ethernet over IP (EoIP) tunnels can be terminated on a guest anchor controller?
Can I create Ethernet over IP (EoIP) tunnels between controllers that run different softwareversions?
Can the Cisco 2100/2500 Series Wireless LAN Controller be used as a guest anchor controller inthe unsecured network area?
Can the Cisco Wireless LAN Controller Module for Integrated Services Routers (WLCM orWLCM2) be used as a guest anchor controller in the unsecured network area?
What controllers can be used to support guest access in the unsecured network area?
If a guest anchor controller is used outside the firewall, what firewall ports are open for guestaccess to work?
Can guest traffic pass through a firewall with Network Address Translation (NAT) configured?
In an Anchor - Foreign WLC scenario, which WLC sends out the RADIUS accounting?
The guest tunnel between the internal controller and anchor controller fails. I see these logs in theWLC: mm_listen.c:5373 MM-3-INVALID_PKT_RECVD: Received an invalid packet from 10.40.220.18. Source member:0.0.0.0. source member unknown.. Why?
In a Wireless guest access setup, clients do not receive the IP address from the DHCP Server.The Thu Jan 22 16:39:09 2009: XX:XX:XX:XX:XX:XX DHCP dropping REPLY from Export-Foreign STA error message appears on the Internal controller. Why?
If guest traffic is tunneled to the unsecured network area, where do guest clients get an IPaddress?
Does the Cisco Wireless LAN Controller support web portals for guest authentication?
How do I customize the web portal?
How are guest credentials managed?
Is the lobby ambassador function available in the Cisco Wireless LAN Controller in addition to theWireless Control System (WCS) or NCS?
Can guests be authenticated with an external authentication, authorization, and accounting (AAA)server?
What occurs when a guest logs on?
Is it possible to skip the guest user authentication and display only the web page disclaimeroption?
Do we need to have the remote controller and guest anchor controller on the same mobility group?
If there is more than one guest SSID, can each WLAN (SSID) be directed to a unique web pageportal?
What is the functionality of the new setting in the WLC release 7.0, WebAuth on Mac FilterFailure?
Does the client operate properly if the browser is configured for proxy server?
Is there a deployment guide for Wireless Guest Access?
Is there a design guide for Wired and Wireless Guest Access?
Related Information
Introduction
This document provides information on the most frequently asked questions (FAQs) about the