Cisco Cisco Wireless LAN Controller Module Guía Para Resolver Problemas
Configure 802.11n on the WLC
Document ID: 108184
Contents
Introduction
Prerequisites
Requirements
Components Used
Related Products
Conventions
802.11n − An Overview
How Does 802.11n Provide Greater Throughput
Guidelines for 802.11n Deployment
Configuring 802.11n
Configure the WLC for 802.11n
Configure the Client for 802.11n
Factors that Affect 802.11n Throughput
Verify
Troubleshoot
Unable to Achieve 802.11n Data Rates
Clients Cannot Connect to the WLC
Related Information
Prerequisites
Requirements
Components Used
Related Products
Conventions
802.11n − An Overview
How Does 802.11n Provide Greater Throughput
Guidelines for 802.11n Deployment
Configuring 802.11n
Configure the WLC for 802.11n
Configure the Client for 802.11n
Factors that Affect 802.11n Throughput
Verify
Troubleshoot
Unable to Achieve 802.11n Data Rates
Clients Cannot Connect to the WLC
Related Information
Introduction
This document provides information on how 802.11n technology works and how to configure 802.11n on the
Wireless LAN Controller (WLC).
Wireless LAN Controller (WLC).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
How to configure a WLC for basic operations
•
Lightweight Access Point Protocol (LWAPP)
•
Components Used
The information in this document is based on these software and hardware versions:
WLC 4404 that runs software version 5.1.151.0
•
Cisco Aironet 1250 series Access Point (AP)
•
Intel Wireless client card adapter
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.