Cisco Cisco Wireless LAN Controller Module Manual Técnica

EAP−TLS under Unified Wireless Network with
ACS 4.0 and Windows 2003

Document ID: 71929

Contents

Introduction
Prerequisites
Requirements
Components Used
Network Diagram
Conventions

Windows Enterprise 2003 Setup with IIS, Certificate Authority, DNS, DHCP (DC_CA)
DC_CA (wirelessdemoca)
Windows Standard 2003 Setup with Cisco Secure ACS 4.0
Basic Installation and Configuration
Cisco Secure ACS 4.0 Installation
Cisco LWAPP Controller Configuration
Create the Necessary Configuration for WPA2/WPA
EAP−TLS Authentication
Install the Certificate Templates Snap−in
Create the Certificate Template for the ACS Web Server
Enable the New ACS Web Server Certificate Template
ACS 4.0 Certificate Setup
Configure Exportable Certificate for ACS
Install the Certificate in ACS 4.0 Software
CLIENT Configuration for EAP−TLS using Windows Zero Touch
Perform a Basic Installation and Configuration
Configure the Wireless Network Connection
Related Information

Introduction

This document describes how to configure secure wireless access using Wireless LAN Controllers (WLCs),
Microsoft Windows 2003 software and Cisco Secure Access Control Server (ACS) 4.0 via Extensible
Authentication Protocol−Transport Layer Security (EAP−TLS).

Note: For more information about the deployment of secure wireless, refer to the Microsoft Wi−Fi web site

and Cisco SAFE Wireless Blueprint.

Prerequisites

Requirements

There is an assumption that the installer has knowledge of basic Windows 2003 installation and Cisco
controller installation as this document only covers the specific configurations to facilitate the tests.

For initial installation and configuration information for the Cisco 4400 Series Controllers, refer to the Quick
Start Guide: Cisco 4400 Series Wireless LAN Controllers. For initial installation and configuration