Cisco Cisco Wireless LAN Controller Module Manual Técnica
NTP Configuration and Synchronization for Unified
Wireless Network Devices
Wireless Network Devices
Document ID: 82471
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Daylight Savings Time
NTP Configuration
Set Up NTP on the Location Appliance
Set Up NTP on the WCS
Set Up NTP on the WLCs
Instructions for Synching the WCS, Location Appliance, and WLCs
Synchronization Procedure
Verify
Troubleshoot
Troubleshooting Commands
Related Information
Prerequisites
Requirements
Components Used
Conventions
Daylight Savings Time
NTP Configuration
Set Up NTP on the Location Appliance
Set Up NTP on the WCS
Set Up NTP on the WLCs
Instructions for Synching the WCS, Location Appliance, and WLCs
Synchronization Procedure
Verify
Troubleshoot
Troubleshooting Commands
Related Information
Introduction
This document explains how to configure NTP in wireless LAN devices, such as Wireless LAN Controller
(WLC), Wireless Control System (WCS), and Wireless Location Appliance.
(WLC), Wireless Control System (WCS), and Wireless Location Appliance.
In a Unified Wireless Network, it is essential that the WLCs, Location Appliance, and WCS use NTP in order
to have a common clock source. This document explains how to synchronize local time on the different
devices of a Unified Wireless Network. This is particularly important for Daylight Savings Time (DST)
changes.
to have a common clock source. This document explains how to synchronize local time on the different
devices of a Unified Wireless Network. This is particularly important for Daylight Savings Time (DST)
changes.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.