Cisco Cisco Wireless LAN Controller Module Guía Para Resolver Problemas
Products & Services
Wireless LAN Controller Layer 2 Layer 3 Security Compatibility
Matrix
Document ID: 106082
Introduction
This document provides the compatibility matrix for the Layer 2 and Layer 3 security
mechanisms supported on the Wireless LAN Controller (WLC).
mechanisms supported on the Wireless LAN Controller (WLC).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Basic knowledge of the configuration of lightweight APs and Cisco WLCs
Basic knowledge of Lightweight AP Protocol (LWAPP)
Basic Knowledge of Wireless Security Solutions
Components Used
The information in this document is based on a Cisco 4400/2100 Series WLC that
runs firmware version 7.0.116.0
runs firmware version 7.0.116.0
The information in this document was created from the devices in a specific lab
environment. All of the devices used in this document started with a cleared (default)
configuration. If your network is live, make sure that you understand the potential
impact of any command.
environment. All of the devices used in this document started with a cleared (default)
configuration. If your network is live, make sure that you understand the potential
impact of any command.
Conventions
Refer to
Cisco Technical Tips Conventions
for more information on document
conventions.
Cisco Unified Wireless Network Security Solutions
The Cisco Unified Wireless Network supports Layer 2 and Layer 3 security methods.
Layer 2 security
Layer 3 security (for WLAN) or Layer 3 security (for Guest LAN)
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Cisco Unified Wireless Network Security Solutions
Wireless LAN Controller Layer 2 – Layer 3 Security Compatibility Matrix
Cisco Support Community - Featured Conversations
Related Information