Cisco Cisco Wireless LAN Controller Module Guía Para Resolver Problemas
Configure the Local Database Size on the Wireless
LAN Controller
LAN Controller
Document ID: 109356
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Database Size on the WLC
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Database Size on the WLC
Verify
Troubleshoot
Related Information
Introduction
This document explains how to configure and view the local database size on the Wireless LAN Controller
(WLC).
(WLC).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge of how to configure the WLC and Lightweight Access Point (LAP) for basic operation
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco 4400 Series WLC that runs firmware 7.0.98.0
•
Cisco Aironet 1230 Series Lightweight Access Point
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Database Size on the WLC
The local database on the WLC stores entries for these items
Local management users (including lobby ambassadors)
•