Cisco Cisco Video Surveillance 2600 Series IP Camera Hoja De Datos
Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 1
Cisco Video Surveillance 2611 IP Dome
The Cisco
®
Video Surveillance 2611 Standard-Definition IP Dome is a feature-rich digital IP camera
designed to provide superior performance in a wide variety of video surveillance applications. The camera
employs H.264 compression of up to 30 frames per second (fps) at D1 NTSC resolution (720 x 480) or
25 fps at D1 PAL resolution (720 x 576), offering efficient network utilization while providing high-quality
video. This flush-mount dome is designed to be deployed indoors. With its open, standards-based design,
the camera provides an ideal platform for operation as an independent device or as part of a Cisco Video
Surveillance network.
Figure 1 shows the Cisco Video Surveillance 2611 IP Dome.
Figure 1. Cisco Video Surveillance 2611 IP Dome
The Cisco Video Surveillance 2611 IP Dome offers a variety of benefits, including:
●
Optimal imaging efficiency. The 2611 IP Dome can stream video using H.264 compression, reducing
network traffic and storage requirements while providing superior image quality.
●
Motorized focus and zoom. The lens on the 2611 IP Dome allows the focus and zoom to be controlled
remotely, greatly simplifying installations and field of view adjustments.
●
Wide dynamic range. The camera employs powerful digital imaging technology, allowing it to capture high-
quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global
electronic shuttering to ensure natural color rendition, zero blooming and smear, and minimal motion blurring.
●
Dual streaming. The camera can deliver two simultaneous video streams over the network. A combination of
H.264, MPEG4, and MJPEG can be configured. Each video stream can be configured with individual
resolution, quality, and frame rate settings.
●
Flexible power options. The camera supports Power over Ethernet (PoE) 802.3af, and 12 VDC or 24 VAC
power through an optional external power supply.
●
Mounting options. The camera is designed for internal ceiling tile mount deployments. The camera is
equipped with a varifocal motorized lens mounted to a manual pan and tilt mechanism that allows the camera
to be rotated and placed at the proper angle.
●
Dome options. The 2611 IP Dome comes standard with a smoked dome. A clear dome is available as an
optional accessory.