Cisco Cisco Meeting Server 2000
Cisco Meeting Server Release 2.0 : Single Combined Meeting Server Deployments
45
Set up a zone to route calls to the Meeting Server by logging into the VCS as an administrator
and following the steps below.
and following the steps below.
1. Go to VCS Configuration > Zones > New.
2. Create the zone with the following:
l
H.323 Mode = Off.
l
SIP Mode = On
l
SIP Port = 5060 (5061 if using TLS)
l
SIP Transport = TCP or TLS, as appropriate
l
SIP Accept Proxied Registrations = Allow
l
Authentication Policy = Treat as authenticated
l
SIP Authentication Trust Mode = Off
l
Peer 1 Address = the IP address of the Call Bridge
6.2.2 VCS search rule configuration
Add a search rule on the VCS to route calls to the Meeting Server by following the steps below
(e.g. to route any video endpoint call to a call on the Meeting Server using the call prefix 88).
(e.g. to route any video endpoint call to a call on the Meeting Server using the call prefix 88).
1. Go to VCS Configuration > Dial Plan > Search rules
2. Give the rule a suitable name, e.g. VC EPs to Meeting Server.
3. Set the following:
l
Source = Any
l
Request Must Be Authenticated = No
l
Mode = Alias pattern match
l
Pattern Type = Regex
l
Pattern String =
.*@meetingserver.example.com
l
Pattern Behavior = Leave
l
On Successful Match = Stop
l
Target = the zone you created for the Meeting Server.
6.2.3 Creating a space on the Meeting Server
Create a space on the Meeting Server for endpoints to dial into as follows:
1. Sign in to the Web Admin Interface.
6 Dial plan configuration – SIP endpoints