Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Guía De Instalación
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco T3 and E3 Network Modules to
the Network
the Network
Revised: May 1, 2008, OL-12824-01
This guide describes how to connect Cisco T3 and E3 network modules to your network. It contains the
following sections:
following sections:
•
•
•
•
•
1-Port T3/E3 Network Modules
The NM-1T3/E3 network module is a single-port universal T3/E3 network module with integrated
CSU/DSU, clear channel, and subrate support. (See
CSU/DSU, clear channel, and subrate support. (See
.) Channels on the network module can be
configured as either T3 or E3 through Cisco IOS software.
Figure 1
1-Port T3/E3 Network Module Faceplate
Note
The NM-1T3/E3 network module provides subrate T3 support for Digital Link, Kentrox, Larscom,
Verilink, and Adtran. The NM-1T3/E3 network module also provides subrate E3 support for Digital Link
and Kentrox.
Verilink, and Adtran. The NM-1T3/E3 network module also provides subrate E3 support for Digital Link
and Kentrox.
SEE MANUAL BEFORE INSTALLING NETWORK MODULE
72536
NM-1T3/E3
LP
AIS
AL
CD
TX
RX
FERF/RAI
T3/E3
EN