Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Guía De Instalación
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco ISDN PRI Network Modules to
the Network
the Network
Revised: May 1, 2008, OL-12811-01
This guide describes how to connect Cisco Integrated Services Digital Network (ISDN) Primary Rate
Interface (PRI) network modules to your network. It contains the following sections:
Interface (PRI) network modules to your network. It contains the following sections:
•
•
•
•
•
•
•
•
•
•
Note
Unless specifically identified, references to PRI modules in this chapter include all these network
modules.
modules.
Note
Do not install an ISDN BRI network module in the same chassis as an ISDN PRI network module, unless
you are using Cisco IOS Release 11.3(3)T or later. Earlier Cisco IOS releases do not support this
configuration.
you are using Cisco IOS Release 11.3(3)T or later. Earlier Cisco IOS releases do not support this
configuration.
Note
For network module cabling specification, see