Cisco Cisco Unified SIP Proxy Guía Para Resolver Problemas
Enable and Collect Trace Logs in Cisco Unified SIP
Proxy (CUSP)
Proxy (CUSP)
Document ID: 118827
Contributed by Ansha Nasar, Cisco TAC Engineer.
Mar 11, 2015
Mar 11, 2015
Contents
Introduction
Enable Trace Logs
From the GUI
From the CLI
Trace Log Collection
From the GUI
From the CLI
From the Public File System (PFS)
SIP Message Logging
Log Storage Information
CUSP 9.0 and Later
CUSP Versions Earlier than 9.0
Related Information
Enable Trace Logs
From the GUI
From the CLI
Trace Log Collection
From the GUI
From the CLI
From the Public File System (PFS)
SIP Message Logging
Log Storage Information
CUSP 9.0 and Later
CUSP Versions Earlier than 9.0
Related Information
Introduction
This document describes the various options available in Cisco Unified SIP Proxy (CUSP) to enable and
collect trace logs. Traces can be enabled and collected either from the GUI or the CLI. This document
explains each procedure in detail.
collect trace logs. Traces can be enabled and collected either from the GUI or the CLI. This document
explains each procedure in detail.
Enable Trace Logs
From the GUI
Log into the CUSP GUI (http://<IP Address of CUSP Module>/).
1.
Navigate to Troubleshoot < Traces.
2.