Cisco Cisco Firepower Management Center 2000 Guía De Instalación
Restoring a Firepower Management Center to Factory Defaults
Firepower Management Center Getting Started Guide
23
network information about the management interface on the appliance; see
the location of the restore ISO image, as well as the transport protocol and any credentials the appliance needs
to download the file; see
to download the file; see
the system software and intrusion rules updates, if any, that you want to apply after the appliance is restored
to the base version in the ISO image; see
to the base version in the ISO image; see
SCP passwords are not saved. If the configuration specifies that the utility must use SCP to transfer ISO and other
files to the appliance, you will have to re-authenticate to the server to complete the restore process.
files to the appliance, you will have to re-authenticate to the server to complete the restore process.
The best time to save a restore configuration is after you provide the information listed above, but before you
download and mount the ISO image.
download and mount the ISO image.
To save a restore configuration:
1.
From the restore utility’s main menu, select
6 Save Configuration
.
The utility displays the settings in the configuration you are saving.
2.
When prompted, confirm that you want to save the configuration.
3.
When prompted, enter a name for the configuration.
What to Do Next
To use the configuration you just saved to restore the appliance, continue with
.
To load a saved restore configuration:
1.
From the main menu, select
7 Load Configuration
.
The utility presents a list of saved restore configurations. The first option,
default_config
, is the configuration you
last used to restore the appliance. The other options are restore configurations that you have saved.
2.
Select the configuration you want to use.
The utility displays the settings in the configuration you are loading.
3.
When prompted, confirm that you want to load the configuration.
The configuration is loaded. If prompted, confirm the IP address assigned to the appliance’s management
interface.
interface.
What to Do Next
.
Next Steps
Restoring your appliance to factory default settings results in the loss of almost all configuration and event data
on the appliance, including bypass configurations for devices deployed inline. For more information, see
on the appliance, including bypass configurations for devices deployed inline. For more information, see
.
After you restore an appliance, you must complete an initial setup process:
If you did not delete the appliance’s license and network settings, you can use a computer on your
management network to browse directly to the appliance’s web interface to perform the setup. For more
information, see
management network to browse directly to the appliance’s web interface to perform the setup. For more
information, see