Cisco Cisco D9804 Multiple Transport Receiver Guía De Instalación

 

78-4042990-01 Rev B 

113 

 

If you selected Remux as the output stream Format, the following deterministic 
multiplexing configuration appears on the right: 

 

 

1  Enter the combined transport ID (Com CTID) for the common stream, in the 

range from 1 to 65535. 

2  Select the Com CT Name. 

This displays the name of the selected common stream. If the MTR has received 
inband data, a scrolling list of available transports is available. 

3  Enter the common combined transport PID (Com CTPID) for the common 

stream, in the range from 1 to 8192. 

4  Set the session word index for the common combined transport stream (Com CT 

SW Idx) if the common stream is scrambled, in the range from 1 to 512. 

5  Enter the combined transport ID (Reg CTID) for the regional stream, in the 

range from 1 to 65535. 

6  Select the Reg CT Name. 

This displays the name of the selected regional stream, provided by the uplink. If 
the MTR has received inband data, a scrolling list of available transports is 
available. 

7  Enter the combined transport PID for the regional stream (Reg CTPID), in the 

range from 1 to 8192. 

8  Set the session word index for the regional combined transport stream if the 

regional stream is scrambled (Reg CT Sw Idx), in the range from 1 to 512. 

9  The remaining field descriptions are the same as the decombined format. For 

more information, see Setting up the ASI Output Parameters (on page 111).