Brother HL-1850 Guía Del Usuario

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION 

5-10

 

 
Use the following instructions if you wish to use the IPP printing capabilities of 
Windows 2000. 
 

1.  Run the Add Printer Wizard and click the Next button when you see the 

“Welcome to the Add Printer Wizard” screen. 

2.  You are now able to select “Local Printer” or “Network Printer”. Make 

sure that you select “Network Printer”. 

3.  You will see the “Add Printer Wizard” screen. 
4. Select 

the 

“Connect to a printer on the Internet or on your intranet” and 

then enter the following in the URL: field: 
http://printer_ip_address:631/ipp (Where “printer_ip_address” is the 
IP address or DNS name of your printer.) 

5.  When you click “Next”, Windows 2000/XP will make a connection with 

the URL that you specified. 

 
IF THE PRINTER DRIVER HAS ALREADY BEEN INSTALLED 
If the appropriate printer driver is already installed on your PC, Windows 
2000/XP will automatically use that driver for use. In this case, you will simply 
be asked if you wish to make the driver the default driver, after which the Driver 
installation Wizard will complete. You are now ready to print. 
 
IF THE PRINTER DRIVER HAS NOT BEEN INSTALLED 
One of the benefits of the IPP printing protocol is that it establishes the model 
name of the printer when you communicate with it. After successful 
communication you will see the model name of the printer automatically, this 
means that you do not need to inform Windows 2000 the type of printer driver to 
be used. 

6. Click 

“OK”, you will then see the following Printer selection screen in 

the Add Printer Wizard. 

7.  If your printer is not in the list of supported printers, click the “Have 

Disk” button. You will then be asked to insert the driver disk. 

8. Click 

the 

“Browse” button and select the CD-ROM or network share 

that contains the appropriate Brother printer driver. 

9.  Now specify the model name of the printer 
10.  If the printer driver that you are installing does not have a Digital 

Certificate you will see a warning message. Click “Yes” to continue with 
the installation. The Add Printer Wizard will then complete. 

11. Click the “Finish” button and the printer is now configured and ready to 

print.  To test the printer connection, print a test page.