Samsung UD55C-B Manual De Usuario
97
Software Upgrade
-
When there are two or more BMP images, they are displayed on the screen using a
slideshow.
slideshow.
-
It is recommended that the playback interval between two BMP images in the slideshow
should be one second. The image extraction probability will decrease with other playback
intervals.
should be one second. The image extraction probability will decrease with other playback
intervals.
-
A BMP image might not be extracted if it is covered by another image (for example, the mouse
pointer).
pointer).
Move
Enter
Return
Temperature
Auto Power
Auto Power
: Off
버튼
잠금
:
해제
사용자
자동 색상 조정
대기
모드 설정 :
자동설정
휘도
조정 기능
OSD Display
Software Upgrade
Advanced Settings
Advanced Settings
Upgrade is completed.
Power will be off and turned on automatically.
Power will be off and turned on automatically.
OK
-
The displayed image may differ depending on the model.
Performs a software upgrade.
1
Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an
SW code. The image below will appear on the screen of the product.
2
While a BMP image onto which the software code has been converted is displayed on the screen, select
Software
Upgrade
.
3
If a more recent version than the current software version is detected, you will be asked whether to upgrade the current
software. If you select
Yes
, the upgrade is performed.
4
When the software upgrade is completed, the product is turned off and on automatically.
― This only operates with a digital signal, such as in
DVI
,
HDMI1
, or
HDMI2
mode. (The input resolution must be identical to
the panel resolution.)
― In
HDMI1
and
HDMI2
modes, the timing values used for both the PC and TV are only supported if the
Edit Name
is set to
PC
or
DVI PC
.
― This is only supported if the
Size
is set to
16:9
.