Samsung RB21KMFJ5SE Manual De Usuario

 8  English

Operating Guide for Samsung Double-Door Refrigerator

Having gone through the following steps, the refrigerator is fully ready to use. If not, check power supply and 

power source. Please contact local Samsung Service Center in case of any doubts or questions. 

1. Install the shelves and containers dismantled for transportation to their correct positions. 

2. Clear the fridge, freezer and accessories. Clean up the dust built up during packing and 

shipping.  

3. When the refrigerator is connected to a power source, each opening of the fridge door will turn 

on the light inside the fridge.

4. Set temperature control to the lowest level and wait for an hour until the fridge is slightly chilled. 

The compressor will run smoothly at the moment and produce gentle hum. 

5. When internal temperature of the fridge is low enough, you can store food inside the fridge. But 

remember that it takes hours for temperature to reach a suitable level after the refrigerator is 
started. 

 

Check the range of voltage before connecting the fridge to power source. The cable and socket must be 

able to stand for current above 10A. 

Fridge temp display

Power Cool & Power 

Freeze

 state display

Control Lock

 state display

 Fridge temp key

Power Cool & Power 

Freeze key
Control Lock key

 ꞏ Press the “fridge” temp key to set temperature for the fridge.  

 ꞏ Temperature of the fridge is set as the following: 5ºC→ 4ºC→ 3ºC→ 1ºC→ 7ºC→ 5ºC.

 ꞏ If the fridge is not in Power Cool & Power Freeze state, press the “Power Cool & Power Freeze” key. The 

Power Cool & Power Freeze indicator light is on and the fridge enters Power Cool & Power Freeze state. 

 ꞏ The compressor starts and keeps running after “Power Cool & Power Freeze” mode is enabled. 

 ꞏ There are two ways to disable Power Cool & Power Freeze state: 

 

-

Press the “Power Cool & Power Freeze” key to exit Power Cool & Power Freeze state; 

 

-

When the fridge reaches zero Celsius degree, the fridge automatically exits Power Cool & Power Freeze 

state. The “Power Cool & Power Freeze” indicator light goes off after the fridge exits the Power Cool & 

Power Freeze state. 

 ꞏ Keep pressing the “Control Lock” key for 3 seconds and the Control Lock indicator light on the display is 

on. Other keys except the Control Lock key are disabled. 

 ꞏ Keep pressing again the “Control Lock” key for 3 seconds under locked state, the Control Lock indicator 

light on the display goes off. All other keys are now enabled.

★