Samsung RT45H5809SL Top Mount Freezer with Digital Inverter 446 L Manual De Usuario
Operating _11
USING THE CONTROL PANEL
(ELECTRONIC CONNTROL TYPE)
(ELECTRONIC CONNTROL TYPE)
t
r
o
h
s
a
,
n
o
t
t
u
b
e
h
t
s
s
e
r
p
u
o
y
e
m
it
h
c
a
E
•
beep will sound.
u
t
a
r
e
p
m
e
t
e
h
t
e
s
u
n
i
t
o
n
n
e
h
W
•
re display will
turn off, this is normal.
1
Freezer
Press the Freezer button to set the freezer to
desired temperature from the range between
desired temperature from the range between
-14°C and -23 °C. Default set temperature is set
on -20°C and each time you press the Freezer
button, temperature will change in following order
and temperature indicator will display the desired
temperature.
on -20°C and each time you press the Freezer
button, temperature will change in following order
and temperature indicator will display the desired
temperature.
k
n
il
b
lli
w
r
o
t
a
c
i
d
n
i
p
m
e
t
r
e
z
e
e
r
F
r
o
e
g
d
ir
F
when temperature in the fridge or freezer
when temperature in the fridge or freezer
compartment goes up dramatically by storing
warm food or frequent door opening.
(Fridge or Freezer temperature indicator will stop
blinking when temperature in the fridge or freezer
becomes normal. If temperature indicator does
not stop blinking after several hours, please
warm food or frequent door opening.
(Fridge or Freezer temperature indicator will stop
blinking when temperature in the fridge or freezer
becomes normal. If temperature indicator does
not stop blinking after several hours, please
Operating your refrigerator
2
3
4
1
-19
-20
-21
-22
-23
-18
-17
-16
-15
-14
DA68-02493B (KAYRA)-EN-0.2.indd 7
2011.5.24 11:56:57 AM
contact your service center.
(3)
(1)
21. Detach the Fridge and Freezer gaskets and attach
them after rotating 180˚ (Make sure the door
gaskets are properly arranged. if not, there can be
a noise or dew can be formed which affects
performance of unit.
them after rotating 180˚ (Make sure the door
gaskets are properly arranged. if not, there can be
a noise or dew can be formed which affects
performance of unit.
22. Make sure the doors are working properly.
And assemble all the accessories.
And assemble all the accessories.
19. Insert the wire into the Cap Hinge Upp-L (18), the
wire must be fastened in a suitable place by hook,
otherwire the wire could be crushed.
Then assemble the Cap Hinge Upp-L.
wire must be fastened in a suitable place by hook,
otherwire the wire could be crushed.
Then assemble the Cap Hinge Upp-L.
20. Connect the housing.
Assemble the Cap Table (1) and the
Cover Cap Door (3) after assuring the position of
wires, be careful not to crush the wires.
Assemble the Cap Table (1) and the
Cover Cap Door (3) after assuring the position of
wires, be careful not to crush the wires.
(18)
(4)
(5)
(18)
18. Take out the Cap Hinge Upp-L (18) from the
underneath of the Cap Table (1), and put in the
Cap Hinge Upp-R (5). Assemble the
Cap Spacer Door (4)
underneath of the Cap Table (1), and put in the
Cap Hinge Upp-R (5). Assemble the
Cap Spacer Door (4)
(1)
O
20P
G
NI
TA
R
E