Samsung HT-J4200 Manual De Usuario
27
- English
Playing Content
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper
case and lower case letters and always uses upper
case letters.
• The display window cannot show accented letters,
<A,> for instance, may stands for accented <A’s>
like <
À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
Ğ
Before you start!
• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process,
press 5 button while searching.
• There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
1.
Press the PTY SEARCH button while listening to
an FM station.
2.
Press the PTY- or PTY+ button until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
3.
Press the PTY SEARCH button again, while the
PTY code selected in the previous step is still on
the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you have
selected, and tunes in that station.
selected, and tunes in that station.
Recording FM Radio
You can record your favorite radio broadcast on
the inserted USB storage device.
1. Insert a USB device into the USB jack on the
the inserted USB storage device.
1. Insert a USB device into the USB jack on the
front of the product.
2. Go to the FM mode to turn on your desired
radio broadcast.
3. Press the
RED (A)
button to start recording.
The recording process is started.
• The recorded time is displayed in the
• The recorded time is displayed in the
left and the recording time still available
according to free space in the USB storage
device is displayed in the right.
4. Press the
EXIT
button to finish your
recording. The recording is stopped and
saved as a .mp3 file at the same time. To play
the recorded file, refer to "Playing Files on a
USB Device".
✎
The recorded file is saved in Tuner folder which
was created automatically.
✎
Only some buttons are operable while FM
radio is being recorded. (You can enable only
radio is being recorded. (You can enable only
HIGH
-END V
ACUUM TUBE SOUN
D
5V 0.5A
(OPEN/CLOSE) button,
HIGH
-END V
ACUUM TUBE SOUN
D
5V 0.5A
(POWER) button,
EXIT
button,
MUTE
button, and
VOLUME +
,
-
button.)
✎
If you don't press any button while recording,
screen saver will be enabled.
screen saver will be enabled.
✎
No sound effect such as DSP, EQ, etc. is
recorded.
recorded.
✎
The radio is recorded at the specified volume
even if you change the volume or press the
even if you change the volume or press the
Mute button during the recording process.
✎
If you remove the USB device or Power Cable
during the recording process, the recorded
during the recording process, the recorded
file, which has been recorded until then, may
not work.
✎
The recording will not start if the remaining
free space of the USB storage is less than
free space of the USB storage is less than
2MB.
✎
If the USB device is removed or has insufficient
space (under 2MB), the corresponding
space (under 2MB), the corresponding
message is displayed and recording will stop.
Using Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
with high quality stereo sound, all without wires!
• Pairing distance : max. 2 meters, Operating
distance: max. 10 meters.
• Actual Bluetooth performance may differ
depending on your environment, even if
you use your Bluetooth device within the
specified operating distance.
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other
easily using a short, wireless connection.
• A Bluetooth device may hum or malfunction:
• A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with
the receiving/transmitting system of the
Bluetooth device or the Home Cinema.
TOOLS
RETURN
EXIT
INFO
SUBTITLE
HOME
REPEAT
FUNCTION
1
2
3
7
8
9
DISC MENU
PTY - PTY SEARCH PTY +
RDS DISPLAY
TA
TITLE MENU
0
POPUP
4
5
6
MUTE
MO/ST
TUNER
MEMORY
DPS/EQ
TV SOUND
A
B
C
D
TUNING
DOWN
UP
VOLUME
-
+
HT-J4200_XU-ENG_0307.indd 27
2015/3/9 17:37:53