Samsung Blu-ray Home Entertainment System H7750 Manual De Usuario

 - English

Connections

Method 1

Method 3

Method 2

R

Red

W

White

External

Devices

Connecting to a Tv

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the 

TV supports ARC, you can hear the audio from your TV through the home cinema with only this cable connected. 

Connecting to External Devices

Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital 

device.  Select the HDMI1 or HDMI2 mode.

Method 2 Aux IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on 

the external analogue component.  Select the Aux mode.

•   Be sure to match the colours on the cable plugs to the colours on the input and output jacks.

Method 3 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite 

Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the Optical 

Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital 

optical cable.  Select the D. IN mode.

 

✎

To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.

 

✎

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

 

✎

This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.

Selecting an External Device to use

To select an external device after you have connected it, press the 

SOuRCE

 button. Each time you press the 

button, the mode changes in this order : BD/DvD ; D. IN ; Aux ; HDMI1 ; HDMI2 ; FM ; BT