advantor av60 audio verification unit Manual De Usuario
2
Introduction
The Audio Verification Unit (PR107) is designed to enhance security alarm systems by adding
audio verification without changing the existing control panel.
It has been designed to be used with either standard digital communicators ,Red care,
Modems or as a standalone device.
audio verification without changing the existing control panel.
It has been designed to be used with either standard digital communicators ,Red care,
Modems or as a standalone device.
Features
Eight microphone inputs each capable of using 4 microphones.
Audio expander (sold separately) providing up to 128 microphone capability
Audio storage circuit capable of storing up to 30 seconds of audio.
Output to provide visual indication of "microphones active"
Relay contacts (rated at 1 Amp 12V DC)
Two switched outputs (controlled from C/S)
Full duplex two way talk
Broadcast
Facility
Part
set
Facility
Site announcement message
Function
acknowledgement
messages
Site access pass code
Full on site programming and test.
B.T Star (network) services to remove bar on incoming calls.
Remote facilities (from monitoring station)
Remote facilities (from monitoring station)
Each microphone input can be individually switched on or off when "live".
Auto switch through each input for 2 seconds.
Switch between live and recorded audio.
Extend “on line” time (normally 2 minutes).
Shutdown
audio
Pulse relay for approx. two seconds.
Switch
relay
on/off..
Enter pass code to access audio from site.
Talk back to site live.
Broadcast a live message to site.
Playback site message (description of site in use).
Pulse output 1 or 2 for approx. two seconds.
Switch output 1 or 2 on or off..
Programmable options
Programmable options
Select recording only after alarm activated.
Select recording only after alarm system is set
Select negative or positive control input.
Enable or disable B.T Star services.
Select recorded or live audio first when dialling back into site.
Select relay auto switch when connected to central station or controlled by C/S
Record site announcement message
Enable / disable and enter pass code
Enable / disable communication successful for Digicomm