3com fast etherlink xl pci 10-100base-tx Manual De Usuario
Windows NT
3-5
6 Double-click the 3C905B-TX name to display a
description of the 3C905B-TX NIC and its current status.
The dialog box confirms that the 3C905B-TX NIC is working
properly. If a yellow exclamation point or a red X appears
next to the 3Com EtherLink XL adapter name, go to
properly. If a yellow exclamation point or a red X appears
next to the 3Com EtherLink XL adapter name, go to
to troubleshoot
the NIC.
7 Click Cancel to leave each dialog box and return to
the Control Panel.
Windows NT
This section describes how to install the network driver in a
PC running Windows NT versions 4.0 or 3.51.
PC running Windows NT versions 4.0 or 3.51.
Do not use the AutoLink software to install the driver if you
are running Windows NT.
are running Windows NT.
Before you begin, obtain EtherDisk Diskette #2 and
Windows NT installation files (on hard disk, diskettes,
or CD).
Windows NT installation files (on hard disk, diskettes,
or CD).
If Windows NT networking is not installed, you may also
need the following information from your MIS department:
need the following information from your MIS department:
■
Whether you are on a LAN or are connecting to one
through a modem
through a modem
■
Protocol used in the Microsoft Windows Network
(typically TCP/IP or NetBEUI)
(typically TCP/IP or NetBEUI)
■
Name of the Windows NT server domain or workgroup
you belong to
you belong to
■
IP address if you are not using DHCP
Windows NT Version 4.0
If you already have the 3C905B-TX network driver and
want to update it, follow the instructions provided in the
next section.
want to update it, follow the instructions provided in the
next section.
Updating the Network Driver
To update the driver, follow these steps:
To update the driver, follow these steps:
1 Install the 3C905B-TX NIC and connect it to the
network, as described in
2 Restart the PC and start Windows NT.