3M accuglide 2+ taping head brochure Manual De Usuario
Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.
Equipment Warranties:
1. Taping Heads
1. Taping Heads
Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING
OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:
1. 3M sells its AccuGlide
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING
OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:
1. 3M sells its AccuGlide
™
NWT, SMT, STD, SS II, and 2+ Taping Heads with the following warranties: A) The Taping Head knife blades, springs and rollers will be free from all
defects for ninety (90) days after delivery. B) All other Taping Head parts will be free from all defects for three (3) years after delivery.
2. 3M warrants that its AccuGlide
™
HST High Speed Heavy Duty Taping Head and its T-86 "L" Clip Taping Head will be free from all defects for ninety (90) days after delivery.
3. 3M sells its AccuGlide
™
Powered Taping Head with the following warranties:
A. The Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery.
B. All other Taping Head parts contained in the drive assembly will be free from all defects for three (3) years after delivery.
C. The motor and transmission will be free from all defects for ninety (90) days after delivery.
D. All other parts of the drive assembly will be free from all defects for ninety (90) days after delivery.
B. All other Taping Head parts contained in the drive assembly will be free from all defects for three (3) years after delivery.
C. The motor and transmission will be free from all defects for ninety (90) days after delivery.
D. All other parts of the drive assembly will be free from all defects for ninety (90) days after delivery.
If any part is proved to be defective within the warranty period, then the exclusive remedy and 3M’s sole option, to repair or replace the part, provided the defective part is returned
immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after the warranty period unless the part is
received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then
3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install repaired or replacement parts.
3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts
failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error. Limitation of Liability: 3M shall not be liable for direct,
indirect, special, accidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.
immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have become defective after the warranty period unless the part is
received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then
3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install repaired or replacement parts.
3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts
failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error. Limitation of Liability: 3M shall not be liable for direct,
indirect, special, accidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory.
Printed in U.S.A.
© 3M 2006
© 3M 2006
70-0710-0323-3
Industrial Business
Industrial Adhesives and Tapes Division
Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
900 Bush Ave.
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
3
AccuGlide
™
Taping Head 2+
Specifications:
Case Size Capability:
Size:
Min
Max
Length
6" (150mm)
Unlimited
Width
6" (150mm)
Unlimited
Height
4.75" (121mm)
Unlimited
3.5" (90mm) with
optional 2" (50mm)
leg length
Operating Rate: Conveyor speeds up to 80 ft./min. (25m/min.)
Taping Head Dimensions (without tape roll bracket):
Taping Head Dimensions (without tape roll bracket):
2" Head
3" Head
Length
15.75" (400mm)
15.75" (400mm)
Width
4.2" (105mm)
5.2" (130mm)
Height
14.25" (365mm)
14.25" (365mm)
Weight:
Packaged– 17 lbs. (7,7 kg) 18 lbs. (8,2 kg)
Unpackaged– 15 lbs. (6,7 kg) 16 lbs. (7,3 kg)
Unpackaged– 15 lbs. (6,7 kg) 16 lbs. (7,3 kg)
Note: 1) Case size minimums and maximums may also be determined
by the case conveying system used. 2) Cases must meet accepted
industry standards. 3) Cases must be properly filled (not underpacked
or overpacked).
Tape:
For use with 3M brand pressure-sensitive film box sealing tapes.
Width: 1.5 inches [36mm] minimum to 2" or 48mm maximum for
AccuGlide
by the case conveying system used. 2) Cases must meet accepted
industry standards. 3) Cases must be properly filled (not underpacked
or overpacked).
Tape:
For use with 3M brand pressure-sensitive film box sealing tapes.
Width: 1.5 inches [36mm] minimum to 2" or 48mm maximum for
AccuGlide
™
taping heads. 2" or 48mm minimum to 3" or 72 maximum
for 3" AccuGlide
™
taping heads.
Tape roll diameter: up to 16" [405 mm] maximum on a 3" [75mm]
diameter core. Accommodates systems length rolls of 3M film tapes.
Note: The tape roll diameter capacity may be less due to space
limitations where taping heads are installed in machines made by
other manufacturers.
Tape application length: 2.75"± .25 [70mm ± 6mm]
Note: Can be easily adjusted to apply 2" (50mm) tape leg lengths.
Operating Conditions: Use in dry, relatively clean environments at
40° to 105° F [5° to 40°C] with clean, dry boxes.
Important safeguard: Taping heads should not be washed down or
subjected to conditions causing moisture condensation on components.
diameter core. Accommodates systems length rolls of 3M film tapes.
Note: The tape roll diameter capacity may be less due to space
limitations where taping heads are installed in machines made by
other manufacturers.
Tape application length: 2.75"± .25 [70mm ± 6mm]
Note: Can be easily adjusted to apply 2" (50mm) tape leg lengths.
Operating Conditions: Use in dry, relatively clean environments at
40° to 105° F [5° to 40°C] with clean, dry boxes.
Important safeguard: Taping heads should not be washed down or
subjected to conditions causing moisture condensation on components.
Applying
Mechanism
Mechanism
Applying Roller
Buffing
Roller
Roller
Applying
Mechanism
Mechanism
Buffing Roller
Box Flow
Patented curvilinear design for reduced case impact
As the case moves across the head, the applying roller adheres the
tape to the case and continues to roll the tape against the case.
Concurrently, the case lifts the cutoff bracket. When the case clears
the cutoff bracket, the bracket springs down, allowing the blade to
cut the tape. The buffering roller adheres the cut end of the tape to
the trailing end of the case. As the case exits the head, the rollers
return to the starting position ready for the next case.
tape to the case and continues to roll the tape against the case.
Concurrently, the case lifts the cutoff bracket. When the case clears
the cutoff bracket, the bracket springs down, allowing the blade to
cut the tape. The buffering roller adheres the cut end of the tape to
the trailing end of the case. As the case exits the head, the rollers
return to the starting position ready for the next case.
Box Flow
Blade guard
3M, AccuGlide
™
, 3M-Matic
™
,
and Scotch
®
are trademarks
of 3M.