3M novec contact cleaner Manual De Usuario
Ceramic Connector
Cleaned with IPA
Applying contact cleaner to cloth.
Ceramic Connector
Cleaned with Novec Contact Cleaner
2
In method #1, the cleaner is applied to a wiping cloth; the cloth is then used to
wipe the connectors clean. This can be done in the fixture or on individual
connectors during inspections. If cleaned in the fixture additional cleaning at
inspection is all but eliminated.
wipe the connectors clean. This can be done in the fixture or on individual
connectors during inspections. If cleaned in the fixture additional cleaning at
inspection is all but eliminated.
This technique is similar to current practices with alcohol. The advantages of
cleaning with Novec Contact Cleaner are that the cleaning is more complete,
with no residual left behind; no odor; and minimal irritation to skin. In addition,
Novec Contact Cleaner is non-flammable. The cleaner is fast drying, which
also aids in both visual and interferometric inspection.
cleaning with Novec Contact Cleaner are that the cleaning is more complete,
with no residual left behind; no odor; and minimal irritation to skin. In addition,
Novec Contact Cleaner is non-flammable. The cleaner is fast drying, which
also aids in both visual and interferometric inspection.
MT Connector
Cleaned with IPA
MT Connector
Cleaned with Novec Contact Cleaner
Wiping connectors in fixture
with cloth and Novec Contact Cleaner.
with cloth and Novec Contact Cleaner.
Method 1:
Examples of Application Methods
The photos below compare identical connectors that were wiped with isopropanol
(IPA) and Novec Contact Cleaner. The Novec Contact Cleaner does not leave
residual contamination on the surface that can affect fiber optic circuit
performance.
(IPA) and Novec Contact Cleaner. The Novec Contact Cleaner does not leave
residual contamination on the surface that can affect fiber optic circuit
performance.
3M
™
Novec
™
Contact Cleaner
Performance Information