AEG 1000 Manual De Usuario
32
3
6 Electrical
Connection
6.1
Contacting the battery modules
i
To make wiring easier, first remove the front panel(s)
of the external battery units.
of the external battery units.
Unscrew the two centered screws in front panel (1) using a
suitable cross-slot screwdriver (recommended: Phillips PH1).
Now reach behind the front panel on the right and the left and
slide it a few millimeters to the left (2). The lock will be released
you can take off the entire front panel towards the front (3).
suitable cross-slot screwdriver (recommended: Phillips PH1).
Now reach behind the front panel on the right and the left and
slide it a few millimeters to the left (2). The lock will be released
you can take off the entire front panel towards the front (3).
Fig. 12
: Removing the front panel of the battery extension;
removing the top and bottom access slot covers
Each front panel has a top and bottom slot cover. Now remove
the top slot cover in a front panel. If you are using more than one
battery unit, remove both slot covers in all the other front panels
so that you can wire that battery units all the way through.
the top slot cover in a front panel. If you are using more than one
battery unit, remove both slot covers in all the other front panels
so that you can wire that battery units all the way through.
Top slot cover
Bottom
slot cover
slot cover
1
2