AEG 1.04 Manual De Usuario

176 VAC – 264 VAC ±3%

(Bypass)

Frequency

50 Hz / 60 Hz
(Automatic detection)

Frequency tolerance range

±4 Hz

Current consumption at full load (max.)
PROTECT 1.M (system)

44 A (3ph~) or 132 A (1ph~) / 155
A (Bypass)

PROTECT 1.040 (module)

7.3 A (3ph~) or 22 A (1ph~)

System disturbance factor

λ ≥ 0.98

UPS output

Nominal voltage output

220 / 230 / 240 Vac ±2%
(configuration via "CompuWatch"
software)

Nominal frequency

50 Hz / 60 Hz ±0.2 Hz (dependent
on mains frequency)

Type of voltage

Sine, distortion

< 3% THD (linear load)

< 6% THD (non-linear load)

Crest factor

3:1

Overload behaviour

Up to 105% continuous;

with mains supply

> 105% – < 130% for 30s

130% for 2

Following this, automatic,
uninterrupted switchover to
integrated bypass (SBS).
Switch-off after 1 min. if overload
continues to be present (switch
back if overload decreases = load
< 90%)

Overload behaviour with

Up to 105% continuous;

battery operation

> 105% – < 130% for 30s

130% for 2

Short-circuit behaviour

3 x I

for 100 ms