australian-monitor amis ppa2 Manual De Usuario

 

 

 

 

 

The Australian Monitor Installation Series PPA2 dual phantom power supply 
is an in-line power supply that will provide phantom power for 2 
condenser mics. With phantom power selectable between 12VDC & 
48VDC, the AMIS PPA2 is a cost effective phantom supply that will power 
nearly any commercially available microphone. The AMIS PPA2 can be 
run off 2 9 volt batteries or can be powered by the supplied 12 VDC 
power supply. As part of the AMIS Contractor Tools range, the AMIS PPA2 
is an inexpensive Phantom Power supply that is integral to a wide variety 
of installations. 
 

 

 

•  Power LED: This LED indicates the unit is “on” 
•  12VDC Power input: This input accepts power from the supplied 

12VDC power supply. Note that the tip is Negative. 

•  Mic 2 input: This balanced XLR input excepts the mic 2 signal & 

supplies Phantom power to this condenser mic 

•  Mic 2 Output: This balanced XLR output is for connection to a mixing 

console, signal processor etc 

•  Mic 1 input: This balanced XLR input excepts the mic 1 signal & 

supplies Phantom power to this condenser mic 

•  Mic 1 Output: This balanced XLR output is for connection to a mixing 

console, signal processor etc 

•  Phantom Power Voltage Selector: This switch selects between 12 volt 

& 48 volt phantom power depending on the requirements of the 
mics connected