Canon EOS-1Ds Manual De Usuario
1-2
1
2
3
4
Cover/Table of
Contents
Introduction
Downloading Images
from the Camera
from the Camera
Setting the Cameras
other than the EOS-1D
Series Cameras
other than the EOS-1D
Series Cameras
Setting the EOS-1D
Series Cameras
Series Cameras
Troubleshooting
Index
Remote Shooting
Prepare to Download Images
For a camera with [Communication] included as a menu function, you can communicate with
EOS Utility to download images to your computer by selecting a [Communication] setting.
EOS Utility to download images to your computer by selecting a [Communication] setting.
O
The setting on this page is necessary for the EOS 5D, EOS 30D, EOS 20D, EOS 10D,
EOS DIGITAL REBEL XT/350D DIGITAL and EOS DIGITAL REBEL/300D DIGITAL.
EOS DIGITAL REBEL XT/350D DIGITAL and EOS DIGITAL REBEL/300D DIGITAL.
O
For cameras other than the above, it is not necessary to perform settings for the
camera. Continue with the procedure in “Connect the Camera and the Computer and
then Start EOS Utility”
camera. Continue with the procedure in “Connect the Camera and the Computer and
then Start EOS Utility”
(p.1-3)
.
1
Check that the camera is not connected to the computer and then
set the camera’s power switch to <ON>.
set the camera’s power switch to <ON>.
2
Set the camera’s [Communication].
O
With the EOS 30D, set [ Communication]
in menu to [Print/PC].
in menu to [Print/PC].
O
Set the [Communication] for other
cameras in the same procedure as the
EOS 30D, using the following for a
reference.
cameras in the same procedure as the
EOS 30D, using the following for a
reference.
3
Press the <
> button to switch the LCD monitor display off
and then set the camera’s power switch to <OFF>.
Setting a Camera with [Communication] Settings
Operation window in the EOS 30D
[Communication] settings for different cameras
Camera model
Menu
Setting
O
EOS 5D
[
Communication]
[PC connect.]
O
EOS 30D
[
Communication]
[Print/PC]
O
EOS 20D
[
Communication]
[Normal]
O
EOS 10D
[Communication]
[Normal]
O
EOS DIGITAL REBEL XT/350D DIGITAL
[
Communication]
[PC connection]
O
EOS DIGITAL REBEL/300D DIGITAL
[
Communication]
[Normal]
About the PTP Setting
When using Windows XP, you can also download JPEG images that use the PTP (Picture
Transfer Protocol) function
Transfer Protocol) function
(p.1-8)
.
O
When setting the [Communication], always ensure that the camera is not connected
to the computer beforehand. Setting the [Communication] while the camera is
connected to the computer will cause camera and software malfunctions.
to the computer beforehand. Setting the [Communication] while the camera is
connected to the computer will cause camera and software malfunctions.
O
When using the EOS 5D or EOS DIGITAL REBEL XT/350D DIGITAL, the remote
shooting function and camera setting function in EOS Utility cannot be used if the
camera’s [Communication] is set to [Print/PTP].
shooting function and camera setting function in EOS Utility cannot be used if the
camera’s [Communication] is set to [Print/PTP].
O
When using the EOS 30D, the camera and EOS Utility cannot communicate if the
camera’s [Communication] is set to [LAN (WFT-E1)].
camera’s [Communication] is set to [LAN (WFT-E1)].
O
When using the EOS 20D, EOS 10D or EOS DIGITAL REBEL/300D DIGITAL, the
camera and EOS Utility cannot communicate if the camera’s [Communication] is set
to [PTP].
camera and EOS Utility cannot communicate if the camera’s [Communication] is set
to [PTP].
O
With the EOS 10D, you must change the firmware to version 2.0.0 or later. For details
on changing, refer to the Canon’s web site.
on changing, refer to the Canon’s web site.