Canon pixma mp460 Manual De Usuario
108
Chapter 11
Troubleshooting
Cannot Print Properly From The Digital Camera
The following are possible errors that may occur when printing directly from a digital still camera or
digital video camcorder*, and the countermeasures to eliminate them.
*Hereafter, digital still cameras and digital video camcorders are collectively called a digital camera
or camera.
digital video camcorder*, and the countermeasures to eliminate them.
*Hereafter, digital still cameras and digital video camcorders are collectively called a digital camera
or camera.
Note
z
PictBridge-compatible digital cameras can be connected to your machine for
direct printing.
direct printing.
z
This section describes errors that may be indicated on Canon-brand
PictBridge-compatible cameras. The error messages and operations may
vary depending on the camera you are using. If you are using a non-Canon
PictBridge-compatible camera and not sure how to clear the printer error from
the camera, confirm the message displayed on the LCD of the machine and
clear the error. For clearing errors from the machine, see “An Error Message
Is Displayed On The LCD” on page 98.
PictBridge-compatible cameras. The error messages and operations may
vary depending on the camera you are using. If you are using a non-Canon
PictBridge-compatible camera and not sure how to clear the printer error from
the camera, confirm the message displayed on the LCD of the machine and
clear the error. For clearing errors from the machine, see “An Error Message
Is Displayed On The LCD” on page 98.
z
A communication time out occurs if printing takes a long time or if it takes too
long to send the data. This may stop the printing. In such cases, disconnect
the cable between the machine and the camera, and reconnect the cable
between the machine and the camera. Then, turn the camera on, if it has not
automatically turned itself on. If the problem is still unresolved, select some
other photo and check if it can be printed or not.
long to send the data. This may stop the printing. In such cases, disconnect
the cable between the machine and the camera, and reconnect the cable
between the machine and the camera. Then, turn the camera on, if it has not
automatically turned itself on. If the problem is still unresolved, select some
other photo and check if it can be printed or not.
z
Your PictBridge-compatible device may need to be switched to printing mode
before it is connected to the machine, depending on the model of the device.
Also, it may need to be turned on manually or switched to replay mode after
being connected to the machine. Refer to the instruction manuals supplied
with your camera and take the necessary steps before connection.
before it is connected to the machine, depending on the model of the device.
Also, it may need to be turned on manually or switched to replay mode after
being connected to the machine. Refer to the instruction manuals supplied
with your camera and take the necessary steps before connection.
z
The FINE Cartridge nozzles may be clogged if printing becomes faint or the
colors are incorrect. See “When Printing Becomes Faint Or Color Is Incorrect”
on page 84.
colors are incorrect. See “When Printing Becomes Faint Or Color Is Incorrect”
on page 84.
z
If the paper is curled or its surface is scratched during printing, make sure that
you are using the correct type of paper.
you are using the correct type of paper.
z
For errors indicated on the camera and their solutions, also refer to the user’s
manual of the camera. For other problems associated with a digital camera,
contact the manufacturer of the camera.
manual of the camera. For other problems associated with a digital camera,
contact the manufacturer of the camera.
Error message on camera
Action
Printer in use/Printer warming up
Photos are being printed from the computer.
Wait until printing ends. If the machine is warming up, wait until warm-up
ends.
Wait until printing ends. If the machine is warming up, wait until warm-up
ends.
No paper/Paper error
Load paper in the Auto Sheet Feeder and press [OK] on the machine.
If the Paper Output Tray is closed, open it. Printing is resumed.
If the Paper Output Tray is closed, open it. Printing is resumed.
Paper jam
Remove the jammed paper, load new paper, and press [OK] on the
machine and retry printing.
machine and retry printing.
Printer cover open
Close the Scanning Unit on the machine.
No print head
The FINE Cartridge may not be installed properly, or the Cartridge may not
be the compatible with this machine. Install the appropriate FINE
Cartridge. If lines are misaligned or the resulting output is not satisfactory,
carry out the FINE Cartridge Alignment.
be the compatible with this machine. Install the appropriate FINE
Cartridge. If lines are misaligned or the resulting output is not satisfactory,
carry out the FINE Cartridge Alignment.