Canon pixma mp460 Manual De Usuario
Chapter 9
73
Changing The Machine Settings
Bluetooth Settings
For details, see “Performing Bluetooth Communication” on page 69.
Device name
Specifies the name of this machine that is displayed on a Bluetooth compatible device.
Access refusal
When this is set to <ON>, the machine denies access from a Bluetooth compatible device.
Security
When this is set to <Enable>, the passkey can be specified.
Passkey
Changes the passkey.
Other Settings
Date display
Changes the display order for shooting dates to be printed.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Adjust contrast
Use this to adjust the contrast of the LCD if it is too low or too high.
Note
z
When <Print date only> or <Print date & file no.> is selected in the
<Settings 1> tab on the Settings screen (Memory card), the shooting
date is printed in the date display order you selected. For Print
settings, see “Changing The Print Settings” on page 26.
<Settings 1> tab on the Settings screen (Memory card), the shooting
date is printed in the date display order you selected. For Print
settings, see “Changing The Print Settings” on page 26.
z
The shooting date format is as specified in the DPOF setting from
DPOF printing.
DPOF printing.
Important
If you set this setting to <Read/write mode>, the operation for printing or
maintenance cannot be performed. After you finish operation of the
memory card dedicated drive, be sure to revert this setting to <Read-only
mode>.
maintenance cannot be performed. After you finish operation of the
memory card dedicated drive, be sure to revert this setting to <Read-only
mode>.