Gateway 7450R Manual De Usuario
52
Gateway 7450R Server System Manual
Replacing a fan
Fan 1 is located between the expansion cards and the drive bays and fan 2
is located between the two blowers. See “Interior of system” on page 5 for the
locations of the fans.
is located between the two blowers. See “Interior of system” on page 5 for the
locations of the fans.
To replace a fan:
1
Use the system management software to determine which fan has failed.
2
Turn off the system and disconnect the power cord and external
peripherals.
peripherals.
3
Open the case. See “Opening the case” on page 18 and “Preventing static
electricity discharge” on page 17.
electricity discharge” on page 17.
4
Unplug the fan cable from the system board and remove the cable from
the cable clamps.
the cable clamps.
5
Lift the fan out of the fan bracket. (The fan bracket is not secured to the
chassis and may come out when you remove the fan. Replace it on the
pins on the bottom of the chassis.)
chassis and may come out when you remove the fan. Replace it on the
pins on the bottom of the chassis.)
6
Insert the new fan into the fan bracket. Make sure the direction of
rotation and airflow match the direction and airflow of the fan you
removed.
rotation and airflow match the direction and airflow of the fan you
removed.
Fan 1
Fan 2
8507328.book Page 52 Thursday, February 15, 2001 11:28 AM