Gateway 860 Manual De Usuario
44
Chapter 4: Configuring the NAS
www.gateway.com
10
Enter the gateway IP address, then press the
Exit
button to end input.
11
Select
OK
, then press the
Enter
button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
appears.
Configuring the LAN2 setting
DHCP
This option lets the NAS automatically obtain IP settings from the LAN2 host.
To configure LAN2 using DHCP:
1
Press the
Enter
button.
2
Press the
Next
or
Previous
button to select
Network
on the Main menu, then
press the
Enter
button.
3
Select
LAN 2
, then press the
Enter
button.
4
Select
DHCP
, then press the
Enter
button.
5
Select
DHCP2 On
if you want to get IP address assigned automatically from
the NAS, then press the
Enter
button.
- OR -
Select
DHCP2 Off
if you want to manually set the IP settings (IP address,
net mask, and gateway IP address), then press the
Enter
button.
An asterisk appears next to the DHCP On or DHCP Off option.
6
Select
OK
, then press the
Enter
button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
appears.