Siemens TC63 Manual De Usuario
TC63 AT Command Set
4.7 AT+IFC
s
TC63_ATC_V00.490
Page 97 of 501
5/24/05
Confidential / Draft - Do not copy
Notes
• When using XON/XOFF flow control (
=1,x or
=3,x) in data mode,
should not be used
while the data transmission is paused with XOFF. Before entering the command mode with
the paused
transmission should be resumed using the XON character.
• For compatibility reasons, the
command can be used in Multiplex mode, though the settings will not
then save the current configuration to the user profile with
, the changed
setting will become
active after restart.