Siemens pocket 2011 tango Manual De Usuario

KAP15.FM5

18.7.99

Gigaset 2011 Tango: A30852-X1106-B307-2-7619

You can operate up to six handsets from the Gigaset 2000 

Tango family at a Gigaset 2011 Tango base station.

The handset supplied with your telephone is already reg-

istered at the base station with the internal call number 

1 and base number 1.

Each additional handset that you purchase must be regis-

tered at the base station. We recommend that when you 

are registering other handsets at the base station, to keep 

the base number 1 for this base station.

Tango handset at a base station

To avoid unauthorized users from registering a handset at 

your base station, you must carry out the following proce-

dure within one minute.

(

t means: browse usingx

, 

confirm using u

 

)

You can only register handsets from the Gigaset 

Tango family. It is not possible to register other 

Gigaset handsets.

If you want to operate your handset at more 

than one base station (up to six) (➔ page 52), 

you must repeat the following procedure at 

each base station.

? Press the base station paging key until you hear the logon 

tone (after approximately ten seconds).

Z

.t Settings

t Register

tBase 1

x

 

u

 

If another base is available, at which the handset should 

be registered. 

o

x

 

Enter four-digit base code and confirm (factory default: 

"0000"). The handset looks for the base available for reg-

istration.

The available internal numbers are shown on the display.

2 … 6 Enter the desired internal number for your handset.

The registration procedure is complete. The message "In-

ternal" appears on the display with the internal number.

Z