Siemens HiPath 4000 Manual De Usuario
Step by Step
Make a call – Comfort Functions
24
Using the switchover key
You can use the switchover key, which must be in-
stalled by the system administrator beforehand, for the
following functions:
•
stalled by the system administrator beforehand, for the
following functions:
•
Consultation (back to the waiting party or back to
the waiting conference)
the waiting conference)
•
Toggling
•
Accepting a waiting call (the call-waiting function
must be activated see
must be activated see
)
•
Accepting a group call
Call waiting
You hear a camp-on busy tone.
Press the flashing key. You accept the camp-on call.
The lamp comes on.
The lamp comes on.
Toggling
You are connected to two subscribers: one is waiting.
The switchover key is illuminated.
The switchover key is illuminated.
Press the key to select the other subscriber. The first
subscriber is waiting.
subscriber is waiting.
Consultation
You call a second subscriber. The second subscriber
does not respond.
does not respond.
Press the key to return to the waiting subscriber or the
waiting conference.
waiting conference.
Group calls
You are connected to a subscriber. There is a pending
group call.
group call.
Press the flashing key. You accept the group call; the
1
1
st
subscriber is put on hold. The lamp comes on.
Switchover
Switchover
Switchover
Switchover