Siemens gigaset c88 Manual De Usuario
27
Press Keys:
Handset Operation
Manual Registration
You may also manually register additional handsets
to your base station.
åååååååååååå
MENU
Open the Menu.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z
REGISTER HS
[
Scroll to Register Handsets and press OK.
PIN
is displayed.
ååååååå
o
[
Enter the 4-digit system PIN (default: 0000) and
press OK (see page 33 for Changing System PIN).
åååååååååååååååååååååååååååå
REGISTER HS
Entry will be flashing.
ååååååå
[
Press OK at the flashing prompt.
Underside of the base station
Hold down the Page/Registration key on the under-
Underside of the base station
Hold down the Page/Registration key on the under-
side of the base station for approximately 10 sec-
onds until a signal tone is heard from the base sta-
tion.
If all internal handset numbers are assigned, the in-
If all internal handset numbers are assigned, the in-
tercom number 4 is reassigned. The handset that
has been registered under number 4 will be dereg-
istered.
When it has been successfully registered, the
When it has been successfully registered, the
handset reverts to the idle state.
De-registering Handsets
ååååååå
INT
Press the Intercom soft key.
ååååååå ååååååå
Z Y
Scroll to the handset to be de-registered.
åååååååååååå
MENU
Open the Menu.
ååååååå åååååååååååååååååååååååååååååååå ååååååå
Z
DE-REGISTER
[
Scroll to De-register and press OK.
PIN
is displayed.
ååååååå
o
[
Enter the 4-digit system PIN (default: 0000) and
press OK.
åååååååååååååååååååååååååååååååå ååååååå
DE-REGISTER?
[
Press OK at the prompt.