Siemens 3000 v3.0 Manual De Usuario
Step-by-Step
Conducting calls – enhanced functions
46
Deactivating a control relay
c
Press the Talk key.
Call the system menu.
> <
[
Select and confirm the menu item.
> <
[
Select and confirm the menu item.
o
Follow the user guidance system from this point on-
wards. Enter the required switch code (1... 4).
wards. Enter the required switch code (1... 4).
a
Press the On-hook key to end the process.
Sending a signal to the network
To enable ISDN-type services/ features to be started via
analog lines (e.g. call waiting when a line is busy, three-
way conference calls, etc.), you must send a signal to
the network before dialling the service code and/or
phone number.
analog lines (e.g. call waiting when a line is busy, three-
way conference calls, etc.), you must send a signal to
the network before dialling the service code and/or
phone number.
This function can also be called directly by entering the
code (
code (
p
You have an external connection.
Call the system menu.
> <
[
Select and confirm the menu item.
> <
[
Select and confirm the menu item.
o
Enter the service code and/or the phone number.
External call forwarding with a multi-
ple subscriber number
ple subscriber number
If your communication system is connected to an ISDN
multiple device line, then you can forward all incoming
calls from the public network through your multiple sub-
scriber number (MSN) to an external destination.
multiple device line, then you can forward all incoming
calls from the public network through your multiple sub-
scriber number (MSN) to an external destination.
There are three types of forwarding:
•
•
Calls are forwarded immediately (1=immediate call
forwarding).
forwarding).
•
Calls are forwarded after a certain time (2=unan-
swered calls).
swered calls).
Menu
Service?
#90=Control Relay
Off?
Off?
Menu
Service?
*51=Recall to Net-
work?