Xyron 2500 Manual De Usuario
Training Video
The Xyron 2500 comes with an instructional video. In addition to explaining how
to load supply rolls, the video also includes tips on how to use the machine. Xyron
recommends watching this video before attempting to load and use the 2500.
The Xyron 2500 comes with an instructional video. In addition to explaining how
to load supply rolls, the video also includes tips on how to use the machine. Xyron
recommends watching this video before attempting to load and use the 2500.
Remove the machine from the packaging
and place on a level surface. Locate
the crank handle and training video
which are taped to the bottom
inside of the machine.
and place on a level surface. Locate
the crank handle and training video
which are taped to the bottom
inside of the machine.
Install the crank
handle by carefully
threading clockwise
(direction of the arrows)
into the lower rubber roller.
Cut the tie wraps holding
the upper cut bar and lower
guide together.
handle by carefully
threading clockwise
(direction of the arrows)
into the lower rubber roller.
Cut the tie wraps holding
the upper cut bar and lower
guide together.
Step 1:
•
Remove the top cover of the machine
by lifting upward.
by lifting upward.
•
Grasp the handle on the lower
access door; pull to open.
access door; pull to open.
Step 2:
•
Match the colored dots on the end of
each supply roll with the corresponding
dots on the side of the machine.
Note which roll is identified as
“top” and “bottom”.
each supply roll with the corresponding
dots on the side of the machine.
Note which roll is identified as
“top” and “bottom”.
•
Slide the supply rolls into the
grooves in the sides of the machine,
making certain that the roll is
inserted completely.
grooves in the sides of the machine,
making certain that the roll is
inserted completely.
Setting Up
Loading Supply Rolls
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500