Garmin 3600 Manual De Usuario
iQue
™
3600
QueGPS Options
GPS Applications
5
To use QueGPS Options:
1. Tap the QueGPS application tab or the Menu icon to display the
Options
Options
Menu.
2. Observe the list of options:
•
Tap
Preferences to display the GPS preference options.
• When in 2D mode, tap New Elevation to reset the elevation.
• Tap New Location when initializing the GPS Receiver if you
have moved over 600 miles from your last use location or if you
have not powered up the unit in over thirty days.
have moved over 600 miles from your last use location or if you
have not powered up the unit in over thirty days.
To use QueGPS Preferences:
1. Tap the Preferences option to display the GPS Preferences Menu.
2. Observe the list of options with check boxes:
•
Tap
WAAS Enabled to enable the Wide Area Augmentation
System operating mode. (See Additional Information about WAAS
on page 53.)
on page 53.)
•
Tap
Battery Saver to change the rate at which the GPS receiver
updates your position data to conserve battery power. The GPS
receiver slows the frequency at which it calculates your location
and therefore requires less battery power with the result being a
slight loss in position accuracy. The GPS is turned completely Off
when the antenna is fully closed.
receiver slows the frequency at which it calculates your location
and therefore requires less battery power with the result being a
slight loss in position accuracy. The GPS is turned completely Off
when the antenna is fully closed.
You cannot operate in the WAAS and Battery Saver modes
at the same time. If you attempt to check both boxes, a message
will display and the last option checked will remain on after you
tap the message “OK”
at the same time. If you attempt to check both boxes, a message
will display and the last option checked will remain on after you
tap the message “OK”
Set New Elevation
Select New
Location for
Initialization
Preference Settings
QueGPS Options
QueGPS Preferences Menu
QueApplicationsGuideFinal.indd 15
6/23/2003, 3:17:58 PM