Mitsubishi diamond pro 900 Manual De Usuario

- 1-14 -

Figure 6 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple Macintosh.

1.

Power off, both the monitor and the computer.

2.

Set the DIP switches of Macintosh Adapter according to the setting chart.
(See 7.3  Macintosh Adapter AD-A205 settings)

3.

Connect the 15-pin (DB-15P) end of the AD-A205 Adapter to the straight 15-pin connector on
the Macintosh video port on the CPU or on the video board.

4.

Connect the sub-miniature 15-pin (DB9-15P) end of AD-A205 Adapter to the SC-B102 cable.

5.

Connect the other end of the SC-B102 cable to the DB9-15P receptacle on the back of the
monitor.

6.

Power on the Macintosh, then the monitor.

7.        After using the system, power off the monitor, then off the Macintosh.

Figure 7 shows the SC-B102 or “75

Ω

” coaxial cable (not supplied) connection to the graphics video

card (PC-CAD and workstation).

1.

Power off, both the monitor and the computer.

2.

Connect one end of  the SC-B102 cable or the “75

Ω

” coaxial cable to the output connector on

the CPU, or on the video board.

3.

Connect the other end of the SC-B102 cable or the “75

Ω

” coaxial cable to the DB9-15P

receptacle or the BNC receptacles on the back of the monitor.

4.

Power on the computer, then the monitor.

5.

After using the system, power off the monitor, then off the computer.

Power Cord

CABLE SC-B102

DB-15P
DB9-15P

   Macintosh

Adapter

AD-A205

Computer

Apple Macintosh

Computer

High Resolution

Graphic Video Card

Power Cord

 “75

Ω

”  coaxial cable

Please see next page about BNC connection.

       Cable SC-B102

R

G

B

HD

VD

D-SUB

COMP.

BNC

R

G

B

HD

VD

D-SUB

COMP.

BNC

High Resolution

Graphic Video Card

Figure 6.

Figure 7.