Mitsubishi diamond pro 900 Manual De Usuario
- 1-23 -
ENGLISH
The following should be observed in order to use the USB function reliably.
•
Make sure all connections are made firmly and correctly.
•
Make sure the operation of the devices connected to the downstream ports before changing USB
Upstream ports. It may take approximately 15 seconds max. until the devices have been
enumerated by the computer and start to operate after the Upstream ports are changed.
Upstream ports. It may take approximately 15 seconds max. until the devices have been
enumerated by the computer and start to operate after the Upstream ports are changed.
•
Do not change the Upstream ports during enumeration to prevent errors of the operation of devices
or application software.
or application software.
•
Do not unplug the USB cable during the enumeration.
•
Close all Windows programs before disconnecting USB devices, USB cables or changing
Upstream ports.
Upstream ports.
•
Do not disconnect USB devices, USB cables or change Upstream ports while the USB Monitor
control application is open.
control application is open.
•
Do not switch off/on fast or repetitively.
N O T E