GE rm24948 rm24948 rm24948 Manual De Usuario

5

4

1. Press and hold the SETUP button until

the red indicator stays on, then release
the SETUP button.

2. Press and release the desired device

button (TV, VCR/DVD, etc.). The red
indicator blinks, then stays lit.

3. Enter the 4 digit code for

your brand of TV, VCR,
etc., from the Library Code
Table by using the CH-, V-,
CH+ and V+ buttons.

Use the CH- button to enter the first digit.
Use the V- button to enter second digit.
Use the CH+ button to enter the third digit.
Use the V+ button to enter the fourth digit.

For Example: To enter code 0107, don’t
press CH-, press V- once, don’t press CH+
and press V+ seven times. The red LED
blinks off with each keypress.

Changes the channels.

Also controls DVD SKIP

functions.

POWER Turns
product On or Off.

Changes the volume

level of the product,

normally the TV.

SETUP Used to setup

the remote, and for

code search function.

MUTE Turns off the

TV sound, while the

picture remains.

Selects product to be

operated.

Red Indicator
Lights when any
button is pressed.

Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs,
you might need to press the REC button once, then
press it again for three seconds.

REW, FF, PAUSE VCR/DVD

control buttons operate

your VCR or DVD even

when the remote is set to

operate the TV.

4. Press the MUTE button to save the

code.

Note: for a valid code, the red LED turns off. For an
invalid code, the red LED blinks rapidly for three
seconds before going off.

5. With your device on, press POWER. If the

device turns off, no further programming is
required. Note: If some buttons do not
operate your equipment, try one of the
other codes for your brand.