Hatco tfc461rm-1104(1) Manual De Usuario
WARNINGS
Plug unit into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine the proper voltage and size and
install the proper electrical outlet.
outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine the proper voltage and size and
install the proper electrical outlet.
To avoid any injury or damage to the unit do
not pull unit by power cord.
not pull unit by power cord.
To prevent any injury, discontinue use if
power cord is frayed or worn.
power cord is frayed or worn.
To reduce the risk of fire, the appliance is to
be installed on a non-combustible surface
only. The appliance is to be installed on floors
or counters of non-combustible construction
with non-combustible flooring and surface
finish and with no combustible material
against the underside, or on non-combustible
slabs or arches having no combustible
material against the underside. Such
construction shall in all cases extend not less
than 12" (305 mm) beyond the equipment on
all sides.
be installed on a non-combustible surface
only. The appliance is to be installed on floors
or counters of non-combustible construction
with non-combustible flooring and surface
finish and with no combustible material
against the underside, or on non-combustible
slabs or arches having no combustible
material against the underside. Such
construction shall in all cases extend not less
than 12" (305 mm) beyond the equipment on
all sides.
For safe and proper operation, the unit must
be located a reasonable distance from
combustible walls and materials. If safe
distances are not maintained, discoloration or
combustion could occur. Do not locate unit
under shelving or closer than 12"
(305 mm) from the ceiling.
be located a reasonable distance from
combustible walls and materials. If safe
distances are not maintained, discoloration or
combustion could occur. Do not locate unit
under shelving or closer than 12"
(305 mm) from the ceiling.
Allow a minimum of 1" (25 mm) clearance
along the rear of the unit, and 2" (50 mm)
clearance at the feed and discharge sides to
ensure proper operation and safety.
along the rear of the unit, and 2" (50 mm)
clearance at the feed and discharge sides to
ensure proper operation and safety.
To avoid any injury, turn the power switch
OFF, unplug the unit from the power source
and allow to cool before performing any
maintenance.
OFF, unplug the unit from the power source
and allow to cool before performing any
maintenance.
Unit is not waterproof. DO NOT submerge in
water. Do not operate if it has been
submerged in water. Do not steam clean the
interior or flood with water or liquid solution.
water. Do not operate if it has been
submerged in water. Do not steam clean the
interior or flood with water or liquid solution.
Form No. TFC461RM-1104
1
IMPORTANT SAFETY INSTRUCTIONS
Some exterior surfaces on the unit will get
hot. Use caution when touching these areas
to avoid injury.
hot. Use caution when touching these areas
to avoid injury.
To avoid electrical shock or personal injury,
do not steam clean or use excessive water on
the unit.
do not steam clean or use excessive water on
the unit.
To avoid any injury or damage, the unit must
only be serviced by qualified personnel.
only be serviced by qualified personnel.
To avoid any injury or damage to the unit turn
the power OFF at the fused disconnect
switch/circuit breaker and allow to cool
before performing any maintenance.
the power OFF at the fused disconnect
switch/circuit breaker and allow to cool
before performing any maintenance.
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact
the Hatco Service Department at 800-558-0607
or 414-671-6350;fax 800-690-2966 or
International fax 414-671-3976.
Authorized Hatco Service Agent, or contact
the Hatco Service Department at 800-558-0607
or 414-671-6350;fax 800-690-2966 or
International fax 414-671-3976.
This product has no “user” serviceable parts.
To avoid damage to the unit or injury to
personnel, use only Authorized Hatco Service
Agents and Genuine Hatco Replacement
Parts when service is required.
To avoid damage to the unit or injury to
personnel, use only Authorized Hatco Service
Agents and Genuine Hatco Replacement
Parts when service is required.
Genuine Hatco Replacement Parts are
specified to operate safely in the
environments in which they are used. Some
aftermarket or generic replacement parts do
not have the characteristics that will allow
them to operate safely in Hatco equipment. It
is essential to use Hatco Replacement Parts
when repairing Hatco equipment. Failure to
use Hatco Replacement Parts may subject
operators of the equipment to hazardous
electrical voltage, resulting in electrical shock
or burn.
specified to operate safely in the
environments in which they are used. Some
aftermarket or generic replacement parts do
not have the characteristics that will allow
them to operate safely in Hatco equipment. It
is essential to use Hatco Replacement Parts
when repairing Hatco equipment. Failure to
use Hatco Replacement Parts may subject
operators of the equipment to hazardous
electrical voltage, resulting in electrical shock
or burn.
IMPORTANT! Read the following important safety instructions to avoid personal injury or
death, and to avoid damage to the equipment or property.
death, and to avoid damage to the equipment or property.