honda-automobiles 2010 insight Manual De Usuario
To install a LATCH-compatible child
seat:
seat:
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
have a rigid-type connector as
shown above.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Move the seat belt buckle or
tongue away from the lower
anchors.
tongue away from the lower
anchors.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
indicated by a small button above the
anchor point.
You can find lower anchors in the
slits in the seat-backs.
slits in the seat-backs.
1.
2.
3.
CONTINUED
Installing a Child Seat with
LATCH
LATCH
Installing a Child Seat
Dr
iv
iv
er
and
and
P
asseng
er
Saf
Saf
e
ty
47
BUTTON
LOWER ANCHORS
Rigid type