honda-automobiles glarefree 08v03-s9v-1000-81 Manual De Usuario

 

1.  The zone setting is factory preset to Zone 8. Refer to 

the Compass Calibration Zone map to verify the 
correct compass zone setting for your geographical 
location. 

2.  Push and hold the switch on the right side of the 

display window until the word ZONE appears in the 
display. 

3.  Press the switch repeatedly until the correct compass 

zone setting for your geographical location is 
displayed. 

4.  The display will change back to the compass 

direction after 3 seconds if the switch is not activated. 

The compass function calibrates itself under normal 
driving and turning conditions. However, circumstances 
occasionally arise which may cause the compass to 
display inaccurately. To reset the compass, follow these 
instructions: 

1.  Drive to an open, level area away from large metallic 

objects or structures. 

2.  Push and hold the button on the left side of the 

display window until the CAL icon appears in the 
display. Release the switch to enter the calibration 
mode. 

3.  Drive slowly in 

two to three 
circles until the 
CAL icon 
disappears 
from the 
display. 

4.  The compass 

calibration 
procedure is 
now complete. 

 
 
 

U.S. Patent No. 5255442, 5644851, 5632092, 

5073012, 506612, 5668663, 5724187

 

Compass 

Calibration 

Zones