crimestopper-security-pro rs800 series ii Manual De Usuario
WIRING INSTRUCTIONS
YELLOW / YELLOW/WHITE (-) IGN. & (-) ACC. OUTPUTS (GROUND WHEN RUNNING):
YELLOW
85
86
30
87
2nd IGN
(If needed)
IGN SW.
OR
ANTI-THEFT/
MODULE
+12V CONSTANT
OR
TRANSPONDER
PIN 4: YELLOW/BLACK: (-) ANTI-GRIND/STARTER KILL OUTPUT (OPTIONAL)
Use this wire for the negative side of the Anti-Grind/Starter Disable relay. It can also be used as a sensor disable circuit
for a host alarm. This output activates whenever a remote start is requested, and when the vehicle is remotely locked with
the transmitter. The output can also be programmed to activate passively. (See diagram)
Use this wire for the negative side of the Anti-Grind/Starter Disable relay. It can also be used as a sensor disable circuit
for a host alarm. This output activates whenever a remote start is requested, and when the vehicle is remotely locked with
the transmitter. The output can also be programmed to activate passively. (See diagram)
TO
IGN 2
MOTOR
ACC
START
CUT
BROWN
YELLOW/BLACK
86
85
MAKE CERTAIN TO CONNECT "BROWN" START OUTPUT WIRE TO
MOTOR SIDE OF ANTI-GRIND/START DISABLE RELAY.
IGN 1