Cisco Systems RV016 Manual De Usuario

Model No.

Quick Installation

Quick Installation

A Division of Cisco Systems, Inc.

®

Model No.

WIRED

• 10/100 16-Port VPN Router
• User Guide CD-ROM
• AC Power Cable
• Rack Mounting Kit
• Quick Installation
• Registration Card

1

A

Before you begin, make sure 

that all of your hardware is 

powered off, including the 

Router, PCs, hubs, switches, 

and cable or DSL modem.

B

Connect one end of an Ether-

net network cable to one of 

the numbered ports on the 

front of the Router (see Figure 

B). Connect the other end to 

an Ethernet port on a network 

device, e.g., a PC, print server, 

hub, or switch.

Repeat this step to connect 

more PCs or other network 

devices to the Router.

C

Connect your cable or DSL 

modem’s Ethernet cable to 

the Router’s Internet port. If 

using multiple Internet ports, 

connect a cable to each Inter-

net port you’d like to use, and 

connect the other end to your 

modem. See Figure C.

D

Power on the cable or DSL 

modem and the other network 

device if using one.

2

Connect the Router

Configuring the Router requires the 

setup instructions provided by your 

Internet Service Provider (ISP). If you 

do not have this information, con-

tact your ISP before proceeding.

Your ISP determines how  your PC is 

set up for Internet access. Because 

you are now using the Router to 

share Internet access among sev-

eral computers, you will use the 

setup information to configure the 

Router instead of your PC.

A

Open your PC’s web browser. 

Enter http://192.168.1.1 (the 

Router’s default local IP 

address) in the web browser’s 

Address field and press the 

Enter key.

B

Enter a User Name and Pass-

word on the screen that 

appears. Enter admin (the 

default) in the the User Name 

and Password fields. Then, click 

the OK button.

C

The Router’s Web-based Utility 

will appear with the System 

Summary screen showing. 

Click on the Setup tab, which is 

the next tab over, then con-

tinue with the instruction, 

below, to complete the Net-

work page.

E

B

Configure the Router

B

A

E

Connect the included AC 

power cable to the Router’s 

Power port on the back of the 

Router, as shown in Figure E, 

and then plug the other end of 

the power cable into an elec-

trical outlet.

The System LED on the front 

panel will light up as soon as 

the power adapter is con-

nected properly.

 

C

NOTE:: Make sure your PC’s 
Ethernet adapter is set to obtain 
an IP address automatically. For 
more information, refer to Win-
dows Help.

C