Belkin laserlinkwin95 Manual De Usuario
1
INSTALLING LASERLINK MIO WITH WINDOWS 95
I. Verify that the Laserlink MIO is working properly.
1. Check connections.
- cables and adpaters
Make sure that you are using the proper cables and adapters.
2. Try to print out a configuration page using the printer control panel to
determine if there is a good connection from the Laserlink MIO unit to the printer.
Note: The file TALK.EXE utility will not run properly under Windows 95.
determine if there is a good connection from the Laserlink MIO unit to the printer.
Note: The file TALK.EXE utility will not run properly under Windows 95.
In order to run talk properly, the computer has to be restarted in MS-DOS mode
using the Start/Shutdown... menu option.
If TALK.EXE is executed in an MS-DOS prompt shell only, the utility will
report inaccurate results.
using the Start/Shutdown... menu option.
If TALK.EXE is executed in an MS-DOS prompt shell only, the utility will
report inaccurate results.
HOW TO SET THE COMPUTER’S PARALLEL OR SERIAL PORT SETTINGS:
If you have a serial connection, the baud rates and handshake method must match between the
computer output port and the Laserlink MIO input port. The following diagrams show how to set
the computer’s connection port (serial or parallel) with the Laserlink MIO to the proper settings.
computer output port and the Laserlink MIO input port. The following diagrams show how to set
the computer’s connection port (serial or parallel) with the Laserlink MIO to the proper settings.
Figure 1: Click on the icon My Computer.
Belkin Components
TECHNICAL SUPPORT
(310)898-1100 ext. 263
(310)898-1100 ext. 263