Cisco Systems AS5350 Manual De Usuario

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. 
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance 
and Safety Information document that accompanied this device.

Before working on equipment that is connected to power lines, remove jewelry (including rings, 
necklaces, and watches). Metal objects will heat up when connected to power and ground and can 
cause serious burns or weld the metal object to the terminals. To see translations of the warnings that 
appear in this publication, refer to the Regulatory Compliance and Safety Information document that 
accompanied this device.

Only trained and qualified service personnel should be allowed to install or replace this equipment. 
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance 
and Safety Information document that accompanied this device.

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that 
a UL Listed and Certified fuse or circuit breaker no larger than 60 VDC, 15 A is used on all 
current-carrying conductors. To see translations of the warnings that appear in this publication, refer 
to the Regulatory Compliance and Safety Information document that accompanied this device.

Before opening the chassis, ensure that you have discharged all static electricity from your body and be 
sure that the power is off. 

You need the following tools and equipment: 

Medium-size Phillips screwdriver 

Small or medium flat-blade screwdriver 

ESD-preventive wrist strap

Tie-wraps (optional)

Antistatic bag (optional)