CyberData 010845 Manual De Usuario

CyberData Corporation

930105A

Operations Guide

 Installing and Using the 4-Port PoweredUSB Hub

 

Installation

4

The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is compatible with the following 
operating systems and USB standards.

2.2 Installation

The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is a tabletop unit with mounting feet 
that sit on a flat surface.

Port power 
(Pwr) and Hub 
power LEDs

+24V up to 2.5 Amp load

+24V up to 
6.5 Amp load

USB Host Connector Type B

Strain 
Relief

+12V PoweredUSB Ports

+24V 
PoweredUSB Port

Link and 
Port1 
Status 
LEDs

Standard USB 2.0 Hi-Speed 
Type A Ports

Serial Ports

●

In 

GREEN

 Mode, when 12V power 

applied with no host plugged in - 
Hub Power LED (Blue) is on, the 4 
port Power LEDs and the Host Link 
(connection) LED DO NOT light. 

●

Connect a standard USB 2.0 cable 
from host PC to Host connector on 
back of hub with 12V power 
connected and all four top Port 
Power LEDs light and turn on green 
sequentially and the host 
(connection) Link LED connector 
turns on green.

●

When a peripheral is plugged into 
the enumerated hub; into one of the 
hub ports;  and the peripheral 
enumerates in the OS, the Status Led 
for that Port will light and turn green

●

On a peripheral load error on any 
port, the Status LED turns orange 
and 12V power to the upper portion 
of the connector is turned off until 
the hub is restarted.

Windows 2000 and XP

2.0 Standard

LINUX

PoweredUSB 0.8g

Mac OS-X